Explore trusted rig components for global markets
Fllow us:
  • shabang03
Leave Your Message
MT Series Automated Iron Roughneck for Onshore and Offshore Operations
Iron Roughneck

MT Series Automated Iron Roughneck for Onshore and Offshore Operations

The MT Series Iron Roughnecks offer distinct advantages over comparable models from international manufacturers.These products support a wider range of pipe sizes, deliver higher maximum spin-in torque, offer a higher level of automation, and feature a more flexible base design.

    MT Series Automated Iron Roughneck for Onshore and Offshore Operations

    Product Specifications

    • Model:MT80/MT100/MT160
    • Hydraulic system operating pressure:21Mpa, 30GPM
    • Power supply for the electronic control system: AC110V/220V
    • Maximum make-up/break-out speed for 5-inch drill pipe:80 RPM
    • Spin-in Torque:4000 N·m
    • Temperature rating: -20°C to +50°C
    • Standard: Conforms to API 7K standards
    • Application: Drilling floor
    • Third party witness and inspection report available: Bureau Veritas (BV), CCS, ABS, SJS etc.

     

    Design Advantages

     

    • Three-Point Clamping Design.

    Three clamping dies are evenly distributed at 120° intervals. The hydraulic cylinders actuate synchronously to center and clamp the drill pipe, ensuring stable positioning and reducing slippage during operation while minimizing damage to the drill pipe couple joint.

    • Synchronized Centering Design.

    The spin-in assembly and the lower tong are designed with a common centerline. During clamping, both assemblies move in synchronization to ensure that the upper and lower drill pipes remain coaxially aligned, enabling smooth and reliable pipe connection.

    • High Spin-in Torque Design.

    The spin-in motor drives a gear reduction system to increase spin-in torque to 6,000 ft·lbf. This provides sufficient torque for the backup tong to complete make-up in a single operation, improving connection efficiency and reducing operating time.

     

    Product Key Design Features and Advantages

     

    • Enables tripping operations during inner-string cementing

    The upper tong, lower tong, spin-in tong, and spin-in rollers are synchronously centered. The innovative clamping design allows the same tong assembly to handle different pipe sizes. The compact arrangement of the spinner and upper/lower tongs also facilitates tripping operations during casing cementing, including operations involving inner-string cementing.

    • The system is designed to work with conventional manual elevator handling procedures, allowing integration into drilling operations that retain manual elevator use.
    • The lifting mechanism features a low center of gravity for improved stability. During vertical adjustment of the tong assembly, the telescopic arm remains stationary, while only the tong assemblymoves vertically at the front end. This design minimizes movement of the main structure and enhances operational stability.
    • The equipment uses standard, commercially available clamping dies rather than custom-made components. These dies are easy to source and replace, reducing maintenance costs and spare-parts lead times while helping minimize drilling downtime.
    • The spin-in rollers can be replaced quickly by removing just four bolts, simplifying maintenance and reducing service time
    • The system features intelligent one-touch operation and supports three operating modes: local joystick control, remote control, and optional integration with the driller's cabin control system. These options provide flexible control and facilitate automated operation.
    • The control system can be integrated into the driller's cabin and linked with other automated drilling equipment. It supports coordinated operation, interlocking functions, and further automation enhancements to meet evolving drilling requirements.

     

    Technical Specifications

    Model

    MT80

    MT100

    MT160

    Applicable pipe diameter range

    2 3/8”-5 1/2”

    2 7/8”-8 1/2”

    2 7/8”-10”

    Maximum Make-up Torque

    54000 N·m

    80000 N·m

    140000 N·m

    Maximum Break-out Torque

    80000 N·m

    100000 N·m

    160000 N·m

    Spin-in Torque

    4000 N·m

    Maximum extension beyond the well center

    2780mm

    2850mm

    2850mm

    (Can be extended up to 3500 mm as an optional)

    Overall Dimension(L*W*H)

    1770*1000*2000mm

    2000*1270*2000mm

    2150*1600*3100mm

    Weight

    4000kgs

    5500kgs

    6500kgs

     

    The MT Series Automated Iron Roughneck System, developed by our MENGTAI company, is a key piece of equipment in the oil and gas drilling industry. Designed for onshore and offshore drilling rigs, the system enables integrated, automated drilling-floor operations with minimal manual intervention. Its primary function is to automate and accelerate drill pipe handling and connection operations, helping improve drilling efficiency, enhance operational safety, and support continuous drilling operations while reducing personnel exposure to hazardous tasks and lowering operating costs.

    The development and manufacturing of this equipment has addressed key technological gaps in China's domestic industry. Our technical team has overcome major challenges in developing a fully automated control system for drilling iron roughneck used in both onshore and offshore operations, breaking through technical barriers that previously limited domestic access to this technology.

    Make an free consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset